BLENDERS - MIXERS
|
|
#213 Custom
Stainless 25
Cu.Ft. Jacketed
Double Ribbon
blender, Model
CSB.2460.R,
Serial No. 80057,
24" wide x 5' long x
30" deep, with 4"
slide gate outlet,
hinged 2-piece
stainless steel top
cover, with approx.
5 Hp belt drive
motor with
gear-reducer.
Good Condition.
|
|
|
|
|
|
|
|
|
#232 Breddo 200 Gallon
Jacketed Likwifier, Model
LDW, Serial No. D8257-2
97949, 90 psi rated, all
stainless steel 40" x 40" x
42" deep square tank, with
2 1/2" sanitary thread
outlet, 18" diameter top
cover, with 25 Hp direct
drive motor. (Steam inlet
has been plugged). Good
condition.
|
|
|
 |
|
|
|
|
|
|
|
#244 OHI Paddle
Blender 70 Cu.Ft.,
Serial No. 15054, all
stainless steel
construction, 32"
wide x 7' long x 42"
deep, hopper
infeed, stainless
steel paddle mixers,
end discharge,
hinged top
stainless steel
covers with
safety-grid
openings, 2 Hp
Eurodrive motor.
Portable unit with
forklift rails. Very
good condition.
|
|
|
 |
|
|
|
#1492 Double Cone Stainless Steel Mixer, 3 Cu.Ft., Mfg. by Paul Abbe, Serial No. 100965-18015, 18" diameter x 18" deep, mild steel painted frame, with 1/2 Hp -220/440 volt- varidrive motor, 5" top inlet and 5" outlet with butterfly valve. Mixer has steam injection inlet. Good condition. |
|
|
|
 |
|
# 1249 Oakes
Continuous
Mixer, Model
8MV5A, Serial No.
Q310A, stainless
steel contact, with
2" sanitary thread
inlet/outlet, with
5Hp - 230/460v
variable speed
motor 112 to 898
RPM. Good
condition.
|
|
|
|
# |
#1547 Hayes & Stolz 128 Cu.Ft. Double Ribbon Blender, Model HR128SSS-0105, Serial No. 1199401, stainless steel contact, 52" wide x 8'6" long x 56" deep, with end bottom 4" TriClamp outlet with air-operated slide-gate, unit also has a top-size 12" wide x 24" long overflow outlet, stainless steel top cover with 24" x 24" hinged door with safety drid, with 15 Hp -1750 RPM- 230/460 volt belt drive motor, mild steel support legs. Unit is 9' tall overall. (Missing drive belts and guard cover). Very good condition. | 
#1548 Hayes & Stolz 128 Cu.Ft. Jacketed Double Ribbon Blender, Model HR128-1201SSS, Serial No. 771902, stainless steel construction, 52" wide x 8'6" long x 56" deep, with end-bottom 4" TriClamp outlet with air-operated slide-gate, unit also has a top-side 12" wide x 24" long overflow outlet, stainless steel top cover with 24" x 24" hinged door with safety-grid, with 40 Hp -1775 RPM- 230/460 volt belt drive motor, 3/4 steam jacketed unit. Very good condition. | 
#1596 Hobart Model HCM 300, 30Qt. Vertical Cutter/Mixer, Serial No. 37-387-057, stainless steel contact, see-through top cover, tilt discharge, with 5 Hp -220 volt- 3-phase -1140 RPM- motor. Very good condition. | 
#1597 Hobart Model HCM 450, 45Qt. Vertical Cutter/Mixer, Serial No. 31-1328-564, stainless steel contact, see-through top cover, tilt discharge, with 5 Hp -220 volt- 3-phase -1140 RPM- motor. New condition. |
| |
|
|
|
|
