SIZE REDUCTION
|
|
|
 |
|
#111 Melon half cutter, no tag,
with V-trough feed belts, 6"
wide belts, 17" diameter
stainless steel rotary blade,
3/4 Hp drive for belts, with
stainless steel chutes and
guards. (Missing drive motor
for blade). Good condition.
|
|
|
|
|
|
|
 |
|
|
|
# 238 Fitzmill Model DNA5012,
Serial No. 4872, 4" Tri-Clamp inlet,
6" Tri-Clamp outlet blunt blade
assembly, 30 Hp -3530 RPM belt
drive motor, mild steel base
mounted (with screen). Good
condition.
|
|
|
|
 |
|
#115 Urschel Model F Dicer,
Serial No. 427, stainless steel
frame, hopper infeed, brass
drum, 2 Hp motor drive.
Without cutting parts and
guards. Fair condition.
|
|
|
|
|
 |
|
#116 Urschel Model S Slicer,
Serial No. 104, all stainless steel
contact and frame, with stainless
steel impeller feed drum, stainless
steel slicing blade with 2Hp drive
motor. Unit is missing feed
hopper and chute. (For slicing
products up to 4" in diameter 2000
to 8000 obs/hour. Fair condition.
|
|
|
|
|
 |
|
#117 Urschel Model GRL
Slicer, no tag, with brass feed
drum/impeller, slicing blade,
cross cut blade assembly with
36 blades for 9/32" french
fryes, stainless steel
discharge chute, 2Hp motor
drive. Rated 4000 lbs/hour
potatoes. Missing feed
hopper/chute. Good condition.
|
|
|
|
|
|
 |
|
#118 Urschel Model GRL
Slicer, Serial No. 640, with
brass feed drum/impeller,
slicing blade, cross-cut
blade assembly with 24
blades for 7/16" french
fryes, stainless steel
discharge chute, 5Hp
motor drive. Rated 8000
lb/hour potatoes. Missing
feed hopper/chute. Good
condition.
|
|
|
|
|
|
|
#384 Corenco 15"
Disintegrator, Model
M15, Serial No. 826,
stainless steel contact, with 12" hopper infeed, 16" x 5" rectangular
flanged discharge, 15"
diameter blade, with 25 Hp-1770 RPM -
230/460 volt direct drive motor, stainless steel base. With (2) 3/8" screens. Good
condition.
|
|
|
|
|
|
|
 |
|
#415 Urschel Model G
Dicer, Serial No. 883,
stainless steel contact,
hopper infeed,
stainless steel frame
with wheels, 2 Hp -
230/460 volt drive
motor, with power cord
plug-in. (Missing
spindles). Good
condition.
|
|
|
|
|
|
#424 Fitzmill Model J
Chopper, no tag, stainless
steel contact, with 3" x 2 1/2"
rectangular inlet, 3" x 11"
outlet, with 3-blade impeller, 5
Hp - 3500 RPM motor, mild
steel support stand. (Without
screen). Good condition.
|
|
|
|
|
|
|
 |
|
|
|
#425 Urschel Model L Dicer, Serial No. 261, stainless steel contact, with open stainless steel hopper with feed opening, feed drum &
feed roll to circular knife assembly & cross-cus assembly, set-up for
3/4" dice, with 2 Hp 220/440 volt belt drive motor, mild steel
wheel-mounted base.
|
|
|
|
|
 |
|
|
|
#499 Cauliflower Coring Unit,
stainless steel contact, hand fed,
with continuous chain/belt with
(16) spiked product pads and
11-blade reciprocating knife, end
discharge, mild steel base
mounted. Missing motor drive.
Fair condition.
|
|
|
|
|
|
|
#500 Cauliflower Coring Unit,
stainless steel contact, hand fed,
with continuous chain/belt with
(16) spiked product pads and
11-blade reciprocating knife, end
discharge, mild steel base
mounted. Missing motor drive.
Fair condition.# 500 |
|
 |
|
|
|
|
|
 |
|
#708 Hobart Model VCM-40
Vertical Cutter Mixer, Serial
No. U-73-12239, stainless
steel contact, hinged cover,
with 7 1/2 Hp - 220 volt motor,
portable unit. Good condition. |
|
|
|
#747 Urschel Model GRL
Slicer, Serial No 547,
with brass feed drum /
impeller, with slicing
blade, cross-cut blade
assembly with 36 blades
for 9/32'' french fry cut, s/s
discharge chute, with 2
Hp-230/460 Volt
motor.Rated 4000 lbs /
hour potatoes.Missing
feed Hopper / chute.Good
condition.
|
|
 |
|
|
|
|
|
|
#915 Malaxer / Mill for Olive Oil Production, with top auger feeder 6" with 1/2 Hp motor drive, to 20 Hp-3530 RPM mill, discharges into 32" wide x 48" long x 26" deep stainless steel mix
tank, with 6" auger
discharge. Mix tank has 2
Hp motor, includes 6" x 10' enclosed screw auger with 1 Hp motor. Good condition.
|
|
 |
|
|
|
|
#1110 Fitzmill
Comminutor Model
DKAS 012, 32 fixed
stainless steel
hammers, stainless
steel contact, mild steel
frame, 6'' stainless steel
bottom discharge, 7.5
Hp-Teco Elec. & Mach.
Co. Ltd. Belt drive-1755
Rpm, 3 Ph / 60 Hz.Poor
condition.
|
|
 |
|
|
|
|
 |
|
# 1306 FMC Apple
Coring/ Slicing Unit,
Serial No. 6215-14-72,
stainless steel contact,
with shufflo-feeder, to 8
across coring & slicing
unit. Missing drive
motor. Fair condition.
|
|
|
|
# 1425
Mikro-Pulverizer
Type CFI, Serial
No. 13407,
stainless steel
contact, labratory
mill, with 7''
diameter funnel
infeed to 1'' screw
auger, 4''
diameter
impeller, with
fine screen,
Approx. 1/4 Hp
belt drive for
auger & 1
Hp-3470 RPM
belt drive for
mill.Portable mild
steel base.Fair
condition.
|
 |
|
|
|
#1494 Rietz Vertical Disintegrator, Model RD-16-P32, Serial No. RD-63785-A, with 60" long x 8" diameter stainless steel auger infeed, stainless steel blades, no screen, bottom discharge, (2) side inspection doors, with 60 Hp -3540 RPM- 460 volt motor, mild steel base. Good condition. |
|
|
|
|
|
#1524 Fitzmill Comminutor, Model D6, Serial No. 6910, stainless steel contact, 6" wide blade assembly, with stationary knife blades, hopper infeed 14" X 14", WITH 5 Hp -1750 RPM- 230/460 volt belt drive motor, .0156 screen, control panel with speed controller. Unit has a bottom mounted incline belt 5" wide x 50" long. Good condition. |
|
|
|
|
|
#1653 Rietz Disintegrator, Model RP-18, Serial No. RP710351A, with standard 18" diameter inlet, rectangular outlet, stainless steel contact, with 3/4" square opening screens, 50 Hp -1750 RPM, 230/460 volt direct drive motor, mild steel base. Good condition. |
| |
|
|
|
|
