WASHERS
#535   Girton-type Pallet
Washer, no tag, stainless steel
pass-through pallet washer, 5'
wide x 11' long x 8' high, 27"
wide opening, with 12" wide
Intralox belt through conveyor,
with 1/4 Hp DC gear motor
drive.  With Worthington
centrifugal pump 2 1/2" x 1 1/2"
with 5 Hp - 3740 RPM -
230/460 volt motor, with control
panel.  Good condition.
#765 Stainless Steel
Milk Case Washer,  
no tag,  for plastic
milk crates,  with 15''
x 15'' x 15 1/2' long
tunnel,  stainless
construction,  with (2)
side hinged
inspection covers,  
with (2) centrifugal
pumps.Fair condition.
#882  Garroutte Wash
Tank with Elevator
discharge, stainless
steel construction, with
7' wide x 20' long
Intralox belt, 6'6" high
discharge, with
hydraulic drive rotary
paddle at infeed, s/s
roller at discharge,
missing motor drive for
belt.  Good condition.
#1262  Stainless
Steel Tunnel
Washer 12" wide
x 9' long, 12"
wide intralox
plastic belt, 6'
long x 15" high
s/s hooded
wash section
with side wall
mounted water
sprays (24), with
s/s collection
tank & 2" x 2"
NPT
recirculation
pump with 2 Hp
230/460v motor.  
With 1Hp
230/460
gearmotor for
driving belt.  Very
good condition.

#1556 Automatic Bin Washer, no mfg. tag, 6' wide x 33' long, stainless steel construction, 48" wide dual chain conveyor (missing chain), with 42" wide Intralox trash removal belt at infeed, water rinse/wash tanks with circulation pump and electric water heating elements, with top mounted air blowers (2) with (4) Air-Knives at discharge, side-open inspection doors (some damaged), electric motor drive for chain conveyor. (No controls).  Made in England, Rep. in Georgia, Newsmith.  Good condition.

 

#1558 HMI (Heinzen) Dump/Wash Tank with Elevator, all stainless steel construction, dump/wash tank is 6' wide x 13' long x 45" deep, with 24" wide rubber-flited elevator belt, 10' high discharge, with electric drive motor, tank has (2) side-bottom 6" discharge valves and hinged clean-out covers on each side.  (Belt is in poor condition).

#1559 HMI (Heinzen) Dump/Wash Tank with Elevator, all stainless steel construction, dump/wash tank is 6' wide x 13' long x 45" deep, with 42" wide rubber-flited elevator belt, 10' high discharge, with electric drive motor, tank has (2) side-bottom 6" discharge valves and hinged clean-out covers on each side.  (Missing elevator motor)

#1598  MAF Brush Washer  36" wide x 5' long, Serial No. 0122-8A, with (12) 36" long rotary transverse brush rolls, stainless steel contact, with overhead water sprays, unit has above roller chain with rubber-fingers to keep fruit moving (with 1 Hp motor), stainless steel catchpan, and 1 Hp chain drive for rollers. (Brushes need replacing).

   
Enter starting street address:

City, State or Zipcode:

Home
Services
About SFM
Contact SFM
Food Machinery Around the Globe Blog  

Accum.- Turntables
Air Blowers
Air Cleaners
Air Compressors
Balers
Bean Equipment
Blanchers
Blender-Mixers
Boilers
Breaders Batterers
Cappers
Cartoners
Case Packers
Centrifuges
Checkweighers
CIP Systems
Coders
Color Sorters
Conveyors
Cookers Coolers
Cooling Tunnels
Depalletizers
Detectors
Dryers
Dumpers
Elevators
Evaporators
Fillers
Filters
Flow Meters
Formers
Freezers
Gluers
Graders
Heat Exchangers
Homogenizers
Hot-Break Tanks
Kettles
Labelers
Meat Equipment
Miscellaneous
Molders
Palletizers
Pasteurizers Coolers
Peelers
Pitters
Power Packs
Presses
Pulper Finishers
Pumps
Refrigeration Equip
Retorts
Robots
Scissor Lifts
Sealers
Seamers
Separators
Shakers
Sifters
Shop Equipment
Shrinkwrap Equip
Size Reduction
Snippers
Stainless Steel Tubing
Tanks
Tapers
Tomato Choppers
Tomato Graders
Tri-Blenders
Turntables
Unscramblers
Urschels
Valves - Fittings
Washers
WasteWater Equip
WasteWater Screens
Wrappers

© Copyright Smith
Food Machinery, Inc.
2006-2010 All Rights
Reserved.
Quality Used Food Processing Machinery   
Used Food Processing Machinery and Equipment Brokers.  Services include Plant and Equipment Appraisals, Auction
Services, Plant Liquidation, Plant Dismantlement, Rigging and Assembly of your Food Processing Machinery and Equipment.
Food Processing Machinery, Buy, Sell or Upgrade with Smith Food Machinery. Contact Ed Smith or Grant Smith  
209-465-3688.